FLUKE

Power & Energy Meters

power-energy-meters

测试 & 测量

Test & Measure

test & measure

Tes & Pengukuran

Ujian & Ukuran

การทดสอบและวัดผล

test-measure

Other Test & Measurement

other test & measurement

การทดสอบและการวัดอื่นๆ

other-test-measurement

Fluke 1777 Three-Phase Power Quality Analyzers 

Number of Inputs: 4 inputs, 3 phases and neutral referenced to PE (5 connectors)

Measurement Category: 1000 V CAT III / 600 V CAT IV

Maximum Input Voltage: 1000 V rms / 1000 V dc (1700 Vpk)

Wye and Single Phase: Variable (50 V – 1000 V)

IEC 61000-4-30 Class A Compliance for Nominal Voltages (Vdin): 100 V – 690 V

Input Impedance: 10 MΩ between P-P and P-N, 5 MΩ between P-PE and N-PE

Bandwidth: DC to 30 kHz for PQ measurements, excluding transients

Scaling: 1:1, variable for use of potential transformers

Trigger: Adjustable trigger level. Triggers on high-frequency components > 1.5 kHz

Number of Inputs: 4 inputs, 3 phases and neutral, range selected automatically to attached sensor

DC: 20 A to 2000 A with 80i-2010-EL clamp

Rogowski Coil: 15 mV / 150 mV rms at 50 Hz, 18 mV / 180 mV rms at 60 Hz; CF 4

Scale Factor: Format: mx + b (gain and offset) user configurable

Displayed Units: User configurable (up to 8 characters, for example °C, psi, or m/s)

<h3 class="md-block-header-three">Fluke 1777 Three-Phase Power Quality Analyzers </h3>Voltage Inputs:<ul class="md-block-unordered-list-item"><li>Number of Inputs: 4 inputs, 3 phases and neutral referenced to PE (5 connectors)</li><li>Measurement Category: 1000 V CAT III / 600 V CAT IV</li><li>Maximum Input Voltage: 1000 V rms / 1000 V dc (1700 Vpk)</li><li>Nominal Voltage Range:</li><ul class="md-block-unordered-list-item"><li>Wye and Single Phase: Variable (50 V – 1000 V)</li><li>Delta: Variable (100 V – 1000 V)</li></ul><li>IEC 61000-4-30 Class A Compliance for Nominal Voltages (Vdin): 100 V – 690 V</li><li>Input Impedance: 10 MΩ between P-P and P-N, 5 MΩ between P-PE and N-PE</li><li>Bandwidth: DC to 30 kHz for PQ measurements, excluding transients</li><li>Resolution: 24-bit synchronous sampling</li><li>Sampling Frequency: 80 kS/s at 50/60 Hz</li><li>Scaling: 1:1, variable for use of potential transformers</li></ul>Voltage Transients:<ul class="md-block-unordered-list-item"><li>Measurement Range: ±8 kV</li><li>Sampling Rate:</li><ul class="md-block-unordered-list-item"><li>Model 1775: 1 MS/s</li><li>Model 1777: 1 MS/s, 20 MS/s</li></ul><li>Bandwidth: DC to 1 MHz</li><li>Trigger: Adjustable trigger level. Triggers on high-frequency components &gt; 1.5 kHz</li><li>Resolution: 14-bit synchronous sampling</li></ul>Current Inputs:<ul class="md-block-unordered-list-item"><li>Number of Inputs: 4 inputs, 3 phases and neutral, range selected automatically to attached sensor</li><li>Range:</li><ul class="md-block-unordered-list-item"><li>AC:</li><ul class="md-block-unordered-list-item"><li>1 A to 1500 A with i17XX-FLEX1500</li><li>3 A to 3000 A with i17XX-FLEX3000</li><li>6 A to 6000 A with i17XX-FLEX6000</li><li>40 mA to 40 A with clamp i40s-EL</li><li>4 A to 400 A with clamp i400s-EL</li></ul><li>DC: 20 A to 2000 A with 80i-2010-EL clamp</li></ul><li>Bandwidth: DC to 30 kHz</li><li>Resolution: 24-bit synchronous sampling</li><li>Sampling Frequency: 80 kS/s at 50/60 Hz</li><li>Scaling: 1:1, variable</li><li>Input Voltage:</li><ul class="md-block-unordered-list-item"><li>Clamp: 50 mV / 500 mV rms; CF 2.8</li><li>Rogowski Coil: 15 mV / 150 mV rms at 50 Hz, 18 mV / 180 mV rms at 60 Hz; CF 4</li><li>All at nominal probe range</li></ul><li>Input Impedance: 11 kΩ</li></ul>Aux Inputs:<ul class="md-block-unordered-list-item"><li>Wired Connection with 17XX-AUX adapter</li><li>Number of Inputs: 2</li><li>Input Range:</li><ul class="md-block-unordered-list-item"><li>Direct: 0 V dc to ± 10 V dc</li><li>0 V to 1000 V dc</li></ul><li>Input Impedance: Direct: 2.92 MΩ</li><li>Scale Factor: Format: mx + b (gain and offset) user configurable</li><li>Displayed Units: User configurable (up to 8 characters, for example °C, psi, or m/s)</li></ul>

<h3>Fluke 1777 Three-Phase Power Quality Analyzers&nbsp;</h3>
Voltage Inputs:
<ul>
<li>Number of Inputs: 4 inputs, 3 phases and neutral referenced to PE (5 connectors)</li>
<li>Measurement Category: 1000 V CAT III / 600 V CAT IV</li>
<li>Maximum Input Voltage: 1000 V rms / 1000 V dc (1700 Vpk)</li>
<li>Nominal Voltage Range:</li>
<ul>
<li>Wye and Single Phase: Variable (50 V – 1000 V)</li>
<li>Delta: Variable (100 V – 1000 V)</li>
</ul>
<li>IEC 61000-4-30 Class A Compliance for Nominal Voltages (Vdin): 100 V – 690 V</li>
<li>Input Impedance: 10 MΩ between P-P and P-N, 5 MΩ between P-PE and N-PE</li>
<li>Bandwidth: DC to 30 kHz for PQ measurements, excluding transients</li>
<li>Resolution: 24-bit synchronous sampling</li>
<li>Sampling Frequency: 80 kS/s at 50/60 Hz</li>
<li>Scaling: 1:1, variable for use of potential transformers</li>
</ul>
Voltage Transients:
<ul>
<li>Measurement Range: ±8 kV</li>
<li>Sampling Rate:</li>
<ul>
<li>Model 1775: 1 MS/s</li>
<li>Model 1777: 1 MS/s, 20 MS/s</li>
</ul>
<li>Bandwidth: DC to 1 MHz</li>
<li>Trigger: Adjustable trigger level. Triggers on high-frequency components &gt; 1.5 kHz</li>
<li>Resolution: 14-bit synchronous sampling</li>
</ul>
Current Inputs:
<ul>
<li>Number of Inputs: 4 inputs, 3 phases and neutral, range selected automatically to attached sensor</li>
<li>Range:</li>
<ul>
<li>AC:</li>
<ul>
<li>1 A to 1500 A with i17XX-FLEX1500</li>
<li>3 A to 3000 A with i17XX-FLEX3000</li>
<li>6 A to 6000 A with i17XX-FLEX6000</li>
<li>40 mA to 40 A with clamp i40s-EL</li>
<li>4 A to 400 A with clamp i400s-EL</li>
</ul>
<li>DC: 20 A to 2000 A with 80i-2010-EL clamp</li>
</ul>
<li>Bandwidth: DC to 30 kHz</li>
<li>Resolution: 24-bit synchronous sampling</li>
<li>Sampling Frequency: 80 kS/s at 50/60 Hz</li>
<li>Scaling: 1:1, variable</li>
<li>Input Voltage:</li>
<ul>
<li>Clamp: 50 mV / 500 mV rms; CF 2.8</li>
<li>Rogowski Coil: 15 mV / 150 mV rms at 50 Hz, 18 mV / 180 mV rms at 60 Hz; CF 4</li>
<li>All at nominal probe range</li>
</ul>
<li>Input Impedance: 11 kΩ</li>
</ul>
Aux Inputs:
<ul>
<li>Wired Connection with 17XX-AUX adapter</li>
<li>Number of Inputs: 2</li>
<li>Input Range:</li>
<ul>
<li>Direct: 0 V dc to ± 10 V dc</li>
<li>0 V to 1000 V dc</li>
</ul>
<li>Input Impedance: Direct: 2.92 MΩ</li>
<li>Scale Factor: Format: mx + b (gain and offset) user configurable</li>
<li>Displayed Units: User configurable (up to 8 characters, for example °C, psi, or m/s)</li>
</ul>

Merek:	FLUKE
Model:	1777

Fluke 1777 Penganalisis Kualitas Daya Tiga Fasa